AmarilloPotter County
ESD flooring in Amarillo, to 2.5 x 104 to 1.0 x 106 ohms
A Amarillo equipment floor rarely stops, so the hard part of the job is the calendar rather than the coating. What the record shows here: data centers.
Amarillo, and what gets built here
These are the Amarillo operations that run static sensitive equipment, each one verified against the document named beside it.
Fermi America's HyperGrid, a 5,800-acre campus near Amarillo
Fermi America's HyperGrid, a 5,800-acre campus near Amarillo, is planned to support 18 million sq ft of data centers on 11 GW of on-site power.
Google is investing $40 billion in Texas AI/cloud infrastructure through 2027
Google is investing $40 billion in Texas AI/cloud infrastructure through 2027, including a new data center in Armstrong County just outside Amarillo, part of what Google called its largest single-state investment.
Uptime is the constraint
On a Amarillo floor the coating decision is the easy half. Sequencing it around equipment that cannot be powered down is where the real work sits.
The document behind a Amarillo job
ANSI/ESD S20.20-2021 is the one worth reading first for work like this. Sets the requirements for an ESD control program, and with it the system level thresholds a qualified floor has to support.
What it actually governs
S20.20 is a program standard, not a product standard. It tells an organisation that handles ESD sensitive electrical or electronic parts how to run a control program: what has to be qualified, what has to be verified, and how often. Flooring is one item inside that program, which is why the standard sets a system threshold rather than a floor specification.
Questions from Amarillo
Does a Amarillo data hall need conductive or dissipative?
Your program document decides, and rooms with energized equipment often sit higher rather than lower. FAA-STD-019 specifies 1.0 x 106 to 1.0 x 109 ohms in rooms with live equipment for personnel safety[11], which is above a typical manufacturing floor.
Can you look at our Amarillo floor before we commit to anything?
Yes, and for an existing floor that is the sensible first step. Measuring what you already have against your requirement often costs a fraction of replacing it, and plenty of floors pass. What pushes a floor out of range.
Is Amarillo inside your normal service area?
Yes. Potter County is covered on the regular Texas schedule, so a job here does not carry a travel premium the way a one off out of state trip would.
Sources
- Conductive and dissipative ESD epoxy technical data sheet, resistance and cure figures
Cited here for the conductive flooring/coating resistance band. The ESD Association's own consumer-facing page states only the <= 1.0 x 106 ohm ceiling with no stated floor.
www.arcat.com - FAA-STD-019, floor resistance and grounding requirements for FAA facilities
Lightning and surge protection, grounding, bonding, and shielding for FAA facilities and electronic equipment.
staticworx.com
Every number on this page came from one of those documents. Send us the room and we will tell you which of them your floor has to answer to.