Killeen-TempleBell County
ESD flooring in Killeen, to 2.5 x 104 to 1.0 x 106 ohms
Assembly, rework and test benches are the rooms ANSI/ESD S20.20 was actually written for, and in Killeen that is the work sitting behind this page: defense electronics maintenance.
What is actually in Killeen
Killeen is on the list for the manufacturing measured in Bell County. Each signal below names its source and the date it was verified.
Fort Cavazos (formerly Fort Hood), one of the largest U.S. military installations
Fort Cavazos (formerly Fort Hood), one of the largest U.S. military installations, runs a Career Skills Program whose listing updated 21 May 2025 includes a seven-week semiconductor equipment maintenance track for soldiers (that track is trained in Austin).
The program standard applies directly
In Killeen the floor is one control item inside a wider program that also covers footwear, wrist straps, packaging and benches, and it gets measured with the person standing on it.
The document behind a Killeen job
ANSI/ESD STM7.1-2020 is the one worth reading first for work like this. The test method for qualifying a floor material before installation and for accepting and monitoring it afterwards.
Printed two ways, same document
You will see this cited as STM7.1 and as S7.1, including on manufacturer data sheets. Many report templates still print S7.1. They refer to the same floor resistive characterization method.
Questions from Killeen
What does an ESD floor cost in Killeen?
Most ESD floors in Texas land $8 to $16 a square foot installed, our estimate, with big continuous pours down to $6 to $8. For a sense check the wider published market runs 3.34 to 13.55 per square foot installed[8]. Where a specific room lands depends on what is on the slab now and whether the line keeps running. What moves the number.
Can you look at our Killeen floor before we commit to anything?
Yes, and for an existing floor that is the sensible first step. Measuring what you already have against your requirement often costs a fraction of replacing it, and plenty of floors pass. What pushes a floor out of range.
Is Killeen inside your normal service area?
Yes. Bell County is covered on the regular Texas schedule, so a job here does not carry a travel premium the way a one off out of state trip would.
Sources
- ANSI/ESD S20.20-2021, the ESD control program standard for electronics handling
ESD control program requirements (administrative and technical) for any organization that handles ESD-sensitive electrical or electronic parts.
www.esda.org - ANSI/ESD STM97.1-2025, person plus footwear plus floor system resistance test
System resistance measurement of a person, footwear, and floor tested together; this is the test behind S20.20's under-1.0 x 109 ohm system ceiling.
webstore.ansi.org - ESD Association: conductive or dissipative static control flooring, how to choose
Cited here for the static-dissipative flooring resistance band per the ESD Association.
www.esda.org - ESD flooring cost per square foot installed, from 250+ commercial project bids
Cited here for the published Texas/national ESD flooring market price range, derived from real bid data on 250+ commercial ESD projects.
craftsmanconcretefloors.com
Every number on this page came from one of those documents. Send us the room and we will tell you which of them your floor has to answer to.