Dallas-Fort Worth-ArlingtonCollin County
Static control flooring in McKinney, under 100 volts walking
When a discharge can ignite an atmosphere instead of damaging a part, the conductive band stops being a preference. McKinney carries that kind of work: defense electronics/munitions.
McKinney, and what gets built here
McKinney is here because of the processing and energetic materials work measured in the area. Each entry names its source.
RTX's Raytheon facility in McKinney includes the Advanced Integration and Manufacturing
RTX's Raytheon facility in McKinney includes the Advanced Integration and Manufacturing Center.
The program standard applies directly
A McKinney processing room buys the faster band because the charge has to be gone before it can build, not merely routed somewhere safe eventually.
The document behind a McKinney job
NFPA 99 (2024) is the one worth reading first for work like this. The Health Care Facilities Code. It used to require conductive flooring in operating rooms. That requirement came out in 2015.
What changed and when
NFPA 99 historically required conductive flooring in the 2.5 x 104 to 1.0 x 106 ohm range in operating rooms using flammable anesthetics. That requirement was removed in the 2015 edition and is still absent from the current 2024 edition.
Questions from McKinney
What proves the floor is doing its job?
How soon can you get to McKinney?
Tell us the timing you are working against and we will give you a real date rather than a placeholder. Crews work Collin County alongside the rest of the Texas schedule. Send the details.
Is McKinney inside your normal service area?
Yes. Collin County is covered on the regular Texas schedule, so a job here does not carry a travel premium the way a one off out of state trip would.
Also in Dallas-Fort Worth-Arlington
Crews working McKinney cover Richardson, Plano, Garland, Dallas on the same run, so a job in Collin County rarely stands on its own.
Sources
- ANSI/ESD STM7.1-2020, floor resistance test method for static control flooring
Floor systems resistive characterization: the test method for qualifying floor materials before installation and for accepting and monitoring them after installation.
www.esda.org - ESD Association: conductive or dissipative static control flooring, how to choose
Cited here for the static-dissipative flooring resistance band per the ESD Association.
www.esda.org - DESR 6055.09, DoD explosives safety rule requiring conductive flooring in AA&E areas
Explosives safety standards for DoD operations; makes CONDUCTIVE (not merely dissipative) flooring mandatory in ammunition load/assemble/pack, explosives processing, propellant casting.
www.denix.osd.mil - ESD TR53, compliance verification testing for ESD control items already in service
Technical report for compliance verification testing of ESD control items already in service; the document a facility's periodic floor-resistance recheck follows.
www.esda.org
Every number on this page came from one of those documents. Send us the room and we will tell you which of them your floor has to answer to.